Mike from Ohio bought a upper intake for a trickflow R lower runs 10:20's and 1:30 60ft with a 393 stroker and procharger .. should run in the mid 9's or high 8's after trick flow R lower,,FRP "SUPER BOX" upper heads and twin turbo's I'll post the dyno #'s soon as I get them.. ..
"It has gone 13.9 at 101 in the 1/4 in stock form with my slicks (26x10.5r16 ET Streets)"Matthew Finch..Texas ..I never made it to the track with all these mods:
Ported Supercharger
2.75 upper pulley
10 lb lower pulley (net boost was 17-19 MAX was 21 on a cold day)
Extude honed stock logs
o/r mid pipe
dynomax turbo mufflers
3" exhaust all the way from headers back
100 shot of nitrous
ported throttle body
I made 430 rwhp and 520 trq off nitrous on nitrous i made 552 rwhp and 670 trq from a 100 shot of nitrous plus it dropped my intake temps over 40 "
Matthew is buying a 5.4 2v EFi intake for his crew-cab.. and is adding a big turbo this truck will go high 9's After turbo and intake,, and the other mods I will keep you undated as soon as he gets it together and dyno's and races it later this year 08.
FRP RACING FRP RACING FRP RACING FRP RACING FRP RACING FRP RACING FRP RACING FRP RACING FRP RACING
Jonathan Grier of Boerne TX. bought a upper for this nice Mustang! He's going to run twin turbo's with this set up I'll have more pic when he get's the setup on his car,,
The jig is finally made! and so are the flanges.. This is his lower inake off his truck for the jig to made from, So it fit's perfect! but... The flanges are the wrong thickness,,, should be 1/2" thick.. but they are 3/8". So I had them recut.. and look great..
ClHere's the 1st step in making a intake I design and make it out of poster board glued to card board,, It's easier than cut metal,,ect.. this one should look awsome when done still alot to go before I'm done ..
Here's the intake cut out.. 3/16" 6061 billet aluminum, I use tape to mock it up looks great,, Still alot more to do ,, runner's are 2.5" o.d So flow shouldn't be a problem,, I cut a slit in the runner to make a cone shape.. Runners should be around 7" long. Stay tunned more to come..
FRP Racing FRP Racing FRP Racing FRP Racing FRP Racing FRP Racing FRP Racing FRP Racing FRP Racing FRP Racing
FRP Racing
Custom sheet metal
Intakes
